Workpoint Clients
Nur für den internen Gebrauch
A31003-H3590-S100-7-7620, 06/2012
10-90
HiPath 3000/5000 V9, Service documentation
wclient.fm
optiPoint 500
10.5.1.7
Connection
Procedure: Connecting an optiPoint 500 Telephone
The first time the telephone is switched on,
●
all LEDs light up briefly
●
all LEDs on the add-on devices (AODs), if connected, light up briefly (AOD LEDs do not
necessarily flash at the same time as the LEDs on the telephone)
●
all pixels on the display activate briefly.
Step
Activity
1.
Locate a free interface on the main distribution frame or internal distributor for
connecting the telephone.
2.
Connect the cable from the main distribution frame or internal distributor to the
wall outlet.
>
The maximum range for a standalone or host telephone without additional
is approximately 1000 m (3280 feet) (for J-Y (ST) 2x2x0.6,
∅
0.6 mm).
Perform the terminal test in Section 12.4.11 to determine whether a local power sup-
ply is needed for additional power (for example, in host-client configurations or for
larger ranges).
3.
Label the keys. You have the following options:
●
by hand (in writing); label sheets come with each telephone.
●
using a PC:
–
with the “Key Labeling Tool” (requires MS Word
©
) which is contained on
the “Electronic Operating Instructions” CD.
–
with the “Key Labeling Tool”, which can be called via:
https://siemens-enterprise.com/us/support.aspx
4.
Prepare the telephone for connection:
●
Connect the handset cord to the telephone (marked with symbol) and to the
handset.
●
Do you plan to connect an add-on device? Refer to Section 10.5.2 on
page 10-93 for more information.
●
Do you plan to connect an optiPoint adapter? Refer to Section 10.5.3 on
page 10-95 for more information.
5.
Connect the line cord (marked on the telephone by a symbol).
optiPoint 500 telephones are shipped with a 6 m (20 ft.) line cord and an MW6
(RJ11) plug for connection to a modular telephone jack.
Summary of Contents for HiPath 3000 Series
Page 1252: ......
