Startup and Administration HiPath 5000
Nur für den internen Gebrauch
A31003-H3590-S100-7-7620, 06/2012
6-50
HiPath 3000/5000 V9, Service documentation
start_h5.fm
Perform HiPath 5000 Basic Configuration
6.10.1.2
Adding Individual Nodes for IP Networking
The next steps in creating a central database for IP Networking are the registration of the indi-
vidual nodes and the transfer of the node data to the server net file. The server net file is now
loaded to the Feature server. The customer database is then automatically distributed to the
various nodes.
The prerequisite for adding nodes (HiPath 3000) to a HiPath 3000/5000 network is the success-
ful installation (see Chapter 4, “Installing HiPath 3000”) and startup (see Chapter 5, “Starting
Up HiPath 3000”) of these systems.
Procedure
1.
To select the node to be added to the CDB, call File - HiPath 5000 RSM/AllServe - New
- HiPath 3000.
2.
The Enter Source dialog appears.
3.
Select the appropriate source:
●
Customer database file (to open a saved CDB file)
In this case, select the appropriate CDB file in the Open customer database dialog
displayed.
●
Create offline (to create a CDB generated offline)
In this case, define the new CDB in the Enter node data dialog displayed. You must
then configure customer-specific data.
Summary of Contents for HiPath 3000 Series
Page 1252: ......
