h3h5_in_the_lan.fm
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
13-21
Nur für den internen Gebrauch
HiPath 3000/5000 in the LAN Network
HG 1500 Board
The hardware prerequisite for IP networking is that the systems involved must have at least
one of the following HG 1500 boards:
●
STMI2: Up to eight boards can be used per system (max. four boards per HiPath 3800 cab-
inet).
●
HXGS (wall housing) or HXGR (19” housing): Up to four boards can be installed in HiPath
3500/3550 and up to two in HiPath 3300/3350. Both boards can process up to 16 IP chan-
nels for voice connections with a single PDM1 expansion module.
The IP networked systems and the HG 1500 boards are administered with two different tools:
●
HiPath 3000 Manager E: Extending the existing HiPath 3000 customer database to include
information for IP networking.
●
HG 1500 WBM: Performing HG 1500 board settings.
13.6.4.1
General Parameters for Voice over IP
Before configuring system clients, you must configure the valid parameters for both variants in
HiPath 3000 Manager E:
●
Echo:
You can define here how to compensate for the echoes that occur in connections to con-
ventional telephones via the voice gateway.
●
Traffic statistics:
This is where you define whether to record traffic statistics which can then be queried via
SNMP.
●
Encoding:
This parameter is used to select which voice coding will be implemented.
>
The IP address used for IP networking is always that of the first LAN interface. If IP
networking is routed via another interface, such as LAN2, use IP routing entries to
ensure that the LAN1 interface can be reached.
Summary of Contents for HiPath 3000 Series
Page 1252: ......
