Siemens HiPath 1120, Programming Manual

Page: 61 / 180

Programming an Extension
61
Step by Step
Hotline
With this feature a number entered in the speed dialing
phonebook can be called automatically as soon as the
handset is lifted without having to dial it manually.
An administrative extension (11/101), an overflow exten-
sion or a Door Opener extension cannot be configured
as a Hotline. If a Hotline is assigned to a certain exten-
sion and one of these features is enabled, the Hotline
will be automatically removed from that extension.
By default, no telephone is configured as a Hotline.
Required: Programming Mode must be active (*95
31994).
Activating the Hotline Mode
Enter the code for programming.
Enter the extension number (e.g., 12/102) to be
assigned a Hotline mode.
Enter the speed dialing number you want to select
(e.g., 000 to 249).
Enter the next extension number
or
Press this key.
Initial state for Programming Mode.
4 5
#
Any entry in the Speed Dialing phonebook can
be configured as a Hotline for many extensions.
There is an option that allows you to time the call
for a specified speed dialing number: the
Warmline (code 62). During the timeout the
extension can dial any number.