Siemens HiPath 1120, Programming Manual

Page: 20 / 180

Step by Step
Main Configurations
20
Speed Dialing
You can store up to 250 telephone numbers of up to 20
digits each in the System Speed Dialing. You can assign
a name of up to 10 characters to each number. This
allows you to do alphanumeric searches in the Speed
Dialing Phonebook (see Alphanumeric Search in the
Manual do Usuário).
You can lookup phone numbers in the Speed Dial
Phonebook by entering their assigned speed-dial
number. This can be done from any extension. By
default there are no speed-dial numbers stored in the
phonebook.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
... Enter the appropriate speed-dial number (abbreviated
number).
Enter the internal number, Code "0" for an external line
or the external line number (e.g., 801). Then enter the
external number (up to 20 digits).
When the system is operating as a Satellite PABX, first
select a number for an external line (e.g., 801) or for a
group of external lines (e.g., 890) connected to the
PABX. Next, select the PABX internal access code or
the PABX’s Numbering Plan sequence required for
making an external call. Finally, enter the external
number (up to 20 digits).
Wait 5 seconds Wait for a confirmation tone.
Initial state for Programming Mode.
1 2
0 0 0 4 9 2
For HiPath 1120:
Entry 249 of the speed-dial phonebook is shared
by the Relay and Sensor functions and it may be
assigned a name of up to 15 characters.
A name can be assigned to the number using the
HiPath 1100 Manager.