Siemens HiPath 1100, Service Manual

Page: 222 / 389

Configuring the system specifically for the client
6-222
Service Manual
Table of the System’s Programming Codes
6.2.6 Updating the Software
Table 6-12 Updating the Software
6.2.7 Remote Administration
Programmed
Functions
Code Intermediate data Data to be
programmed
Completing
data entry
Default
SW Information 001
∗
- Displays the software release,
version number, product name,
APS, and serial number.
Press any key
to finalize
entry.
Local SW Update 060 Automatic
Activating a SW
Update 055
∗
- to enable
# - to disable
Automatic # - to disable
Day for SW Update 054 dd (day, from 01 to 31) or Automatic 01
Time for SW
Update 058 hh:mm (hh from 00 to 23
and mm from 00 to 59) Automatic 00:00
External number
for updating the
software 056 Number (up to 20 digits) # instead of
the digit or
Automatic None
Frequency of SW
update 057 Month (01 to 12) Automatic 01
Uploading the SW
update 059 hh:mm (hh from 00 to 23
and mm from 00 to 59) Automatic 00:00
Programmed
Functions
Code Intermediate data Data to be
programmed
Completing
data entry
Default
Service Call *994 Number of Service Center # - to confirm Automatic
Remote Software
Update *9415 Automatic
Remote Operation
Mode 084 1 - Via ISDN
2 - Via modem Automatic 1 - Via ISDN
Activating remote
administration 066
∗
- to enable
# - to disable
Automatic # - to disable
External number
configuration 067 Position: 1 to 4 Number (up to 20 digits) # instead of
slot position None
Remote adminis-
tration password 068 Position: 1 to 4 00000 to 99999 # instead of
slot position None
Remote MSN 069 Position: 001 to 140 or
∗
- to delete
Automatic None