Siemens HiPath 1100, Service Manual

Page: 22 / 389

Important Information
1-22
Service Manual
Safety Information
1.1.4 General Information
Line/Cable Connections
●
All cables coming out of the system must be protected along their entire path inside
conduits, ducts or other appropriate routes of conveyance.
●
Cables must be connected only to their specified connections points.
Location of Safety Equipment
Once maintenance is finished, return all safety equipment to its proper location.
Inspecting your Tools
Inspect tools regularly. Only tools in perfect condition should be used.
Condensation
When moving the equipment from a cold environment to a location at room temperature, take
into consideration “Environmental conditions” on page 2-40 to prevent the occurrence of
condensation. Wait until the equipment is at room temperature and completely dry before
turning it on.
Wall Mounting
●
Some types of walls (e.g., drywall) have limited weight-bearing capacity. Before installing
equipment in wall-mount configuration, make sure the wall can support the weight.
●
Examine the condition of the walls to ensure that there are no cracks or damage that
indicates the presence of humidity.
Flammable Materials
Do not store flammable materials in close proximity to the equipment.
Hazards at the location of operation
●
Ensure that the location is well lit.
●
There is a higher risk of an accident occurring in or near unorganized premises.