Administration
83
Download
General
The HiNet LP5100 device will provide an internal file management
system which allows to store the following data in logical file struc-
tures:
– User configuration data (local settings)
– Firmware (including language packages)
The file transfer between phone device and system is based on
FTP. The following table describes the supported data flow:
The FTP requires the following parameters to be initialized on the
device side before the FTP task can be activated (set locally or via
WEB server):
– IP address of FTP server
– Username
– Account name
– Password
– Path name
– File name
If FTP is invoked remotely, the file location on the FTP server must
be defined completely. Remote activation is done by making use
of the WEB server. If FTP is started locally and no default filename
is configured a browse interface is provided to allow selection of
the file to transfer. During file browsing the following keys perform
the specified function:
Data type
Data flow
Activation
User configura-
tion data
Upload
Local from user interface
Download
Remote by administrator
Firmware
Download
Local from user interface and
Remote by administrator
key
if a directory is selected, move into that directory
key
move up one level in the directory hierarchy
key
move left through the list of files/directories in the
current directory
key
move right through the list of files/directories in
the current directory
key
exits browse mode
key
selects file for transfer
