Step by Step
Using HiPath 4000 as an intercommunication system
92
92
92
92
System-wide voice calling
From your own telephone, you can place a voice call to
any internal party whose telephone has a speakerphone
or a loudspeaker.
Voice calling to a variable destination
A party receives a voice call via his internal station num-
ber.
C
Lift the handset.
or
With the handset cradled: Handsfree talking
D
Enter the system code-number for "voice calling" and
D
the speed calling code for the group member in ques-
tion.
or
Press the key for "voice calling" (must be installed)
and
D
the speed calling code for the group member in ques-
tion.
A connection to the destination loudspeaker is set up
immediately, if
•
there is no busy condition
•
the handset is cradled
•
and voice-calling protection has not been activated
The caller hears a tone confirming when the connection
has been established and the call can begin.
The called party accepts the voice call by lifting the
handset.
If the called party presses the loudspeaker key or the
line key (if installed), the connection is aborted.
Enter the code!
The number of voice calls possible is the same as
the number of normal calls that can be made.
