Using HiPath 4000 as an intercommunication system
91
91
91
91
Step by Step
Using HiPath 4000 as an
intercommunication system
You can voice call an internal HiPath 4000 user via the
loudspeaker in his or her telephone to set up a connec-
tion. You can also initiate voice calling from consultation.
The following functions are available:
•
System-wide voice calling
– to a variable destination
– to a fixed destination
•
Voice calling in a group
– to a variable destination
– to a fixed destination
•
Two-way voice calling within a group
– to a variable destination
– to a fixed destination
•
Announcement to all members of a line group
You can abort voice calling or the announcement by re-
placing the handset or pressing the line key or by pick-
ing up the call on hold during consultation.
For all functions ensure that the
voice calling
protection
for the telephones in question has
been
deactivated
page 25. As far as tele-
phones with no display, e.g. optiPoint 500 entry,
are concerned, the voice call protection is de-ac-
tivated via a key that has been installed.
If a user is voice called and his or her voice-call
protection has been activated, voice calling is ig-
nored and a normal call is put through instead
