Siemens Hicom 300 H Operating Instructions Manual Download Page 69

Page: 69 / 167

Checking the telephone

Step by Step

Checking the assignment of functions
to keys

You can check which functions have been pre-assigned
to specific keys on your telephone. You can also check
what you have saved on individual keys yourself. The fol-
lowing types of key assignment are possible:
•

Repertory dialing (

page 63),

•

Direct station selection (

•

Precondition:

The telephone is in the idle state.

Press the key. The lamp lights up.

Enter the service code.

Select and confirm.

and

Press the required key.
The key assignment is displayed.

Bestätigen und anschließend eine andere Taste drück-
en, um deren Belegung anzuzeigen.

Press the key. The lamp goes out.

program/service

Key function?

Return?

program/service

Summary of Contents for Hicom 300 H








































































































































































Search results

Summary of Contents for Hicom 300 H

Reviews:

Related manuals for Hicom 300 H

Brands by name

Popular brands

Siemens Hicom 300 H, Operating Instructions Manual

Search results

Summary of Contents for Hicom 300 H

Reviews:

Related manuals for Hicom 300 H

Brands by name

Popular brands