Siemens Hicom 300 H Operating Instructions Manual Download Page 44

Page: 44 / 167

Step by Step

System-wide parking (HiPath 4000)

Parking via "system parking" (only tele-
phones without a display)

Press key (must be installed).

...

Enter and note a parking position number (0 to 9).

The call has been parked.

Replace the handset.

Taking a parked call

Via the keypad

Lift the handset or use the speakerphone function.

Enter the system code for "system parking" (if you have
any problems ask your service personnel).

...

Enter the parking position number (0 to 9) you have not-
ed and continue the call.

Via the repertory key

Lift the handset or use the speakerphone function.

Press the repertory key programmed with the system
code + parking position number and continue call.

Press the repertory key programmed with the system
code.

...

Enter the parking position number (0 to 9) you have not-
ed and continue call.

Via "system parking" (only for telephones with no
display)

Lift the handset.

Press key (must be installed).

...

Enter the parking position number (0 to 9) you have not-
ed and continue call.

System parking

Enter the code!

System parking

Summary of Contents for Hicom 300 H








































































































































































Search results

Summary of Contents for Hicom 300 H

Reviews:

Related manuals for Hicom 300 H

Brands by name

Popular brands

Siemens Hicom 300 H, Operating Instructions Manual

Search results

Summary of Contents for Hicom 300 H

Reviews:

Related manuals for Hicom 300 H

Brands by name

Popular brands