Siemens Hicom 300 H Operating Instructions Manual Download Page 43

Page: 43 / 167

System-wide parking (HiPath 4000)

Step by Step

Parking a call manually and then
taking it at a later date

You can manually park a call to your telephone at a free
parking position and take it at your telephone or another
telephone at a later date. This function can also be used
with telephones that do not have a display.

Parking via the keypad

Confirm.

Enter the system code for system parking (if you have
any problems ask your service personnel).

...

Enter and note a parking position number (0 to 9).

The call has been parked.

Replace the handset.

Parking via a repertory key

The system code for "system parking" + a parking num-
ber or only the system code for "system parking" is pro-
grammed on a repertory key (

page 66).

Confirm.

Press programmed repertory key.

...

Enter and note a parking position number (0 to 9).

The call has been parked.

Replace the handset.

Consultation?

Enter the code!

Consultation?

Summary of Contents for Hicom 300 H








































































































































































Search results

Summary of Contents for Hicom 300 H

Reviews:

Related manuals for Hicom 300 H

Brands by name

Popular brands

Siemens Hicom 300 H, Operating Instructions Manual

Search results

Summary of Contents for Hicom 300 H

Reviews:

Related manuals for Hicom 300 H

Brands by name

Popular brands