Siemens Hicom 300 H Operating Instructions Manual Download Page 21

Page: 21 / 167

Answering and making calls

Step by Step

Open listening

You can allow other persons in the room to listen in on
the call. Always inform the other party that you are
switching to the speaker.

Precondition:

You are making a call with the handset.

To activate:

Press the key. The lamp lights up.

To deactivate:

Press the key. The lamp goes out.

Switching to speakerphone

Precondition:

You are making a call with the handset.

and

Press the speaker key and release, then put the hand-
set down and continue the call.

Switching to the handset

Precondition:

You are on the phone in speakerphone

mode.

Lift the handset. Continue the call.

Speaker

Summary of Contents for Hicom 300 H








































































































































































Search results

Summary of Contents for Hicom 300 H

Reviews:

Related manuals for Hicom 300 H

Brands by name

Popular brands

Siemens Hicom 300 H, Operating Instructions Manual

Search results

Summary of Contents for Hicom 300 H

Reviews:

Related manuals for Hicom 300 H

Brands by name

Popular brands