Siemens hicom 150 H optiset E standard Page 4 Operating Instructions Manual Download

Page: 4 / 102

,PSRUWDQW

1RWHV

0DUN

Do not operate the telephone in environments where there is a danger
of explosions.

Use only original Siemens accessories (

page 88). Using other acces-

sories may cause a hazard and will invalidate the warranty and the CE
mark.

Never open the telephone or a key module. If you encounter any prob-
lems, contact System Support.

Never allow the telephone to come into contact with staining or aggres-
sive liquids such as coffee, tea, juice, or soft drinks.
For information on telephone maintenance

page 90.

The telephone conforms to EU directive 1999/5/EG, as attested by the
CE mark.

oi.book Seite 4 Donnerstag, 3. August 2000 3:40 15

Summary of Contents for hicom 150 H optiset E standard







































































































Search results

Summary of Contents for hicom 150 H optiset E standard

Reviews:

Related manuals for hicom 150 H optiset E standard

Brands by name

Popular brands

Siemens hicom 150 H optiset E standard, Operating Instructions Manual

Search results

Summary of Contents for hicom 150 H optiset E standard

Reviews:

Related manuals for hicom 150 H optiset E standard

Brands by name

Popular brands