Siemens hicom 150 H optiset E standard Page 17 Operating Instructions Manual Download

Page: 17 / 102

0DNLQJ

DQG

$QVZHULQJ

&DOOV

6WHS

8VLQJ

0DLOER[HV

If you have programmed the "Mailbox" key (

page 50),

the associated LED lights up when messages have ar-
rived for you. If your telephone is connected to a voice
mail system, the "Mailbox" key will also light up to alert
you to any messages that have arrived.

$FFHVVLQJ

WKH

0DLOER[

Press the illuminated "Mailbox" key.

Confirm.

Select and confirm.

Follow the user prompts.

8VLQJ

7LPHG

5HPLQGHUV

Precondition:

You must have saved a timed reminder

(

page 53). The current time is the time stored.

The telephone rings. The timed reminder appears on
the screen.

Press the key twice.

Lift the handset and replace it again.

US: View messages?

UK: Display Messages?

US: Message sent?

UK: Text?

US: Call voice mail?

UK: Call Voice Mail?

US: Reminder:

UK: Reminder at:

Speaker

If you fail to answer the timed reminder, it re-
peats five times and is then erased.

oi.book Seite 17 Donnerstag, 3. August 2000 3:40 15

Summary of Contents for hicom 150 H optiset E standard







































































































Search results

Summary of Contents for hicom 150 H optiset E standard

Reviews:

Related manuals for hicom 150 H optiset E standard

Brands by name

Popular brands

Siemens hicom 150 H optiset E standard, Operating Instructions Manual

Search results

Summary of Contents for hicom 150 H optiset E standard

Reviews:

Related manuals for hicom 150 H optiset E standard

Brands by name

Popular brands