Siemens HG72G.054M, Instructions For Installation And Use Manual

Page: 19 / 36

19
Using the rotary spit
The rotary spit can be used to cook joints such as rolled joints
and poultry with excellent results. The meat is roasted
thoroughly and evenly.
Use the rotary spit in conjunction with the grill or combination
mode.
Preparing joints
Place the joint as centrally as possible on the rotary spit and
secure it at both ends with the retaining clips.
You can also truss the joint with string. With poultry, bind the
ends of the wings underneath the back and the thighs against
the body. This prevents them from overbrowning.
Pierce the skin on the underside of the wings to allow the fat to
escape.
Inserting the rotary spit
ã=
Risk of burns!
Never touch the hot surfaces of the cooking compartment or
the heating elements. Children must be kept at a safe distance
from the appliance at all times. Open the appliance door
carefully. Hot steam may escape.
Insert the rotary spit as follows:
1.
Hook the spit holder into the bracket on the ceiling of the
cooking compartment.
If you require to preheat the oven, hook in the holder before
preheating.
2.
If the oven has been preheated, only attach the rotary spit if
you are using an oven cloth or wearing (thermal) oven
gloves. To attach the spit, slide one end into the recessed
adapter in the left-hand side panel of the cooking
compartment.
3.
Hook the other end into the holder.
4.
Pour a little water into the baking tray and slide this into shelf
position 1 to collect the drips of fat.
Switching on the rotary spit
Press the function button for rotary spit mode.
The button simply locks into place and operation starts.
Switching off the rotary spit
Press the function button for rotary spit mode.
The button unlocks and operation switches off.
Removing the rotary spit
ã=
Risk of burns!
Never touch the hot surfaces of the cooking compartment or
the heating elements. Children must be kept at a safe distance
from the appliance at all times. Open the appliance door
carefully. Hot steam may escape.
ã=
Risk of burns!
Never touch the rotary spit or other accessories directly when
they are hot. Always wear oven gloves or heat-resistant gloves
when handling hot accessories.
Remove the rotary spit as follows:
1.
Carefully open the appliance door. Carefully remove the
rotary spit from the holder.
2.
Carefully withdraw the rotary spit from the recessed adapter
in the side panel and remove it from the oven.
3.
Take out the baking tray.