Downloaded from www.vandenborre.be
14
Setting rapid heating
Rapid heating is not suitable for all types of heating.
Suitable types of heating
A short signal sounds to indicate that the selected type of
heating is not suitable for rapid heating.
Suitable temperatures
Rapid heating will not work if the temperature is set to less than
100 °C. If the temperature in the cooking compartment is only
slightly less than the temperature you have set, rapid heating is
not necessary. It will not switch on.
Setting rapid heating
Press the
h
button to activate rapid heating. The
appears next to the temperature. Rapid heating begins. The
temperature indicator bars start filling in.
Once all the bars are filled, rapid heating is complete. You will
hear a short signal. The
symbol goes out. Place your dish
in the cooking compartment.
Notes
■
Rapid heating is cancelled if you change the type of heating.
■
If a cooking time has been set, this runs independently of
rapid heating and counts down immediately when operation
is started.
■
You can use the
±
button to check the current cooking
compartment temperature during rapid heating.
■
To ensure an even cooking result, do not place your dish in
the cooking compartment until rapid heating is complete.
Cancelling rapid heating
Press the
h
button. The symbol goes out.
Time-setting options
You can call up the time-setting options menu by pressing
the
0
button. The following functions are available:
If the oven is switched off:
■
Q
= Set timer
■
0
= Set clock
If the oven is switched on:
■
Q
= Set timer
■
x
= Set cooking time
■
y
= Set a later end time
Setting the time-setting options
in brief
1.
Press the
0
button repeatedly until the arrow is next to the
required symbol, e.g. set cooking time function =
Nx
.
2.
Set the desired value with the rotary selector.
3.
Press the
0
button repeatedly until the
Î
rotary symbol
disappears from the clock display.
A detailed description of how to adjust each individual function
is provided below.
Short audible signal
If you cannot change or set a value, you will hear a short
audible signal.
Setting the timer
The timer runs independently of the oven. You can use it as a
kitchen timer and set it at any time.
1.
Press the
0
button.
The time-setting options menu appears. The
N
arrow is next
to the
Q
symbol for the timer. The
Î
rotary symbol above
the two dots indicates that the cooking time can be set using
the rotary selector.
2.
Set the running time for the timer using the rotary selector.
3.
Press the
0
button repeatedly until the
Î
rotary symbol
disappears from the clock display.
You can see the time counting down in the clock display.
When the time has elapsed
A signal sounds. The time on the timer has reached
‹
:
‹‹
.
Press the
0
button. The display goes out.
Cancelling the timer time
Press the
0
button to open the menu. Turn the timer time back
to
‹
:
‹‹
. Press the
0
button repeatedly until the
Î
rotary
symbol disappears from the clock display.
Changing the timer time
Open the menu with the
0
button and use the rotary selector
to change the time. Press the
0
button repeatedly until the
Î
rotary symbol disappears from the clock display. The menu is
exited. The new time counts down.
Setting the cooking time
If you set the cooking time for your dish, operation stops
automatically once this time has elapsed. The oven stops
heating.
Prerequisite: The type of heating and temperature must be set.
Example in the picture: setting for
%
top/bottom heating,
180 °C, cooking time of 45 minutes.
1.
Press the
0
button twice.
The arrow is next to the
Nx
symbol for the cooking time.
The
Î
rotary symbol above the two dots indicates that the
cooking time can be set using the rotary selector
:
3D hot air
%
Top/bottom heating
;
Pizza setting
RQ
RII
VWDUW
VWRS
&NJ
0
3
