Time-setting options
en
13
2.
Press the arrow
¿
to switch to the temperature.
3.
Use the rotary selector to change the temperature.
4.
Press the Start/Stop button.
The set type of heating and the temperature are
displayed in the display.
Rapid heat up
You can use the
c
button to heat up the cooking
compartment particularly quickly.
The rapid heat up function is not possible for all types of
heating.
Suitable types of heating:
To ensure an even cooking result, do not place your
food in the cooking compartment until rapid heat up is
complete.
Making settings
Ensure you have selected a suitable type of heating.
The temperature must be set to above 100 °C,
otherwise the rapid heat up function cannot be started.
1.
Set the type of heating and temperature.
2.
Press the
c
button.
The
c
symbol appears on the left next to the
temperature. The progress line begins to move across.
When rapid heat up is complete, a signal sounds. The
c
symbol goes out. Place your dish in the cooking
compartment.
Notes
■
If you change the type of heating or the temperature
the rapid heat up function is cancelled.
■
If a cooking time has been set, this runs
independently of the rapid heat up process and
counts down immediately when operation is started.
■
You can use the
l
button to check the current
cooking compartment temperature during rapid heat
up.
Cancelling
Press the
c
button. The
c
symbol disappears from
the display.
O
Time-setting options
Time-sett
ing optio
ns
Your appliance has different time-setting options.
Notes
■
A cooking time of up to one hour can be set exactly
to the minute.
A cooking time of over one hour can be set in 5-
minute increments.
■
Depending on which direction you turn the rotary
selector, the cooking time starts at a default value:
Anti-clockwise, 10 minutes,
Clockwise, 30 minutes.
■
The maximum setting you can apply is 23 hours and
59 minutes.
■
After a time-setting option has elapsed, a signal
sounds.
■
Using the
l
button, you can request information
during operation, which then appears briefly in the
display.
Timer
You can set the timer at any time, even if the appliance
is switched off. It runs parallel to the other time settings
and has a separate signal. In this way, you can tell
whether it is the timer or a cooking time which has
elapsed.
1.
Press the
0
button.
The field for the timer opens.
2.
Use the rotary selector to set the timer duration.
The timer starts after a few seconds.
The
U
symbol for the timer and the time counting down
are displayed on the left in the status bar.
When the time has elapsed,
a signal sounds. "
U
00:00" is shown in the display. Use
the
0
button to cancel the audible signal early.
:
4D hot air
%
Top/bottom heating
7RS
ERWWRPKHDWLQJ
&
7RS
ERWWRPKHDWLQJ
&
PLQV
7RS
ERWWRPKHDWLQJ
ꑛ
&
PLQV
Time-setting option
Use
Q
Timer
The timer functions like an egg timer. An
audible signal sounds once the set time
has elapsed.
+
Cooking time
A signal sounds once a set cooking time
has elapsed. The appliance switches off
automatically.
*
End
Set a cooking time and an end time. The
appliance switches on automatically so
that the operation ends at the desired
time.
