en
Accessories
10
Inserting accessories
The cooking compartment has five shelf positions. The
shelf positions are counted from the bottom up.
When using shelf positions 1, 3, 4 and 5, always insert
the accessory between the two guide rods for a shelf
position.
The accessories can be pulled out approximately
halfway without tipping. With the pull-out rails at level 2,
you can pull the accessories out further.
Ensure that the accessory is placed behind the lug
‚
on
the pull-out rail.
Example in the picture: Universal pan
The pull-out rails lock in place when they are fully pulled
out. This makes it easy to place the accessories in
position.To unlock, push the pull-out rails back into the
cooking compartment with a certain amount of force.
Notes
■
Ensure that you always insert the accessories into
the cooking compartment the right way round.
■
Always insert the accessories fully into the cooking
compartment so that they do not touch the appliance
door.
Locking function
The accessories can be pulled out approximately
halfway until they lock in place. The locking function
prevents the accessories from tilting when they are
pulled out. The accessories must be inserted into the
cooking compartment correctly for the tilt protection to
work properly.
When inserting the wire rack, ensure that lug
‚
is at the
rear and is facing downwards. The open side must be
facing the appliance door and the outer rail must be
facing downwards
¾
.
When inserting baking trays, ensure that lug
‚
is at the
rear and is facing downwards. The sloping edge of the
accessory
ƒ
must be facing towards the appliance
door.
Example in the picture: Universal pan
Combining accessories
You can insert the wire rack and the universal pan at
the same time to catch drops of liquid.
When inserting the wire rack, ensure that both spacers
‚
are at the rear edge. When inserting the universal
pan, the wire rack is on top of the upper guide rod of
the shelf position.
Example in the picture: Universal pan
D
D
D
D
D
E
D
D
D
