en
Childproof lock
16
Setting the timer
You can use the timer whether or not the appliance
itself is in use. However, it is not possible to set a
cooking time or end time.
The maximum time that can be set is 23 hours and 59
minutes. Up to 10 minutes, the timer duration can be
set in 30-second increments. Above 10 minutes, the
time increments become longer the higher the value.
The timer duration will start at a different default value,
depending on which button you touch first:
5 minutes if you touch the
A
button and 10 minutes if
you touch the
@
button.
1.
Touch the
v
button until the timer symbol
Q
is
highlighted.
2.
Use the
A
or
@
button to set the timer duration.
After a few seconds, the timer duration will start to
count down.
Tip:
If the set timer duration is the duration for which
you wish to cook your food, use the cooking time. The
appliance will then switch off automatically when it has
finished cooking.
The timer duration has elapsed
An audible signal will sound. The timer duration will be
zero on the display.
Touch any button to switch off the timer.
Changing and cancelling
You can use the
A
or
@
button to change the timer
duration at any time. After a few seconds, the change
will be applied.
To cancel, use the
A
button to reset the timer duration
all the way to zero. The timer is now switched off.
Changing the time
You can change the time again when you need to, e.g.
from summer to winter time.
To do this, when the appliance is switched off, touch the
v
button until the symbol for the time is underlined,
and use the
A
or
@
button to change the time.
A
Childproof lock
Childproof lock
Your appliance is equipped with a childproof lock so
that children cannot switch it on accidentally or change
any settings.
Notes
■
You can go to the basic settings to specify whether
you want the option to set the childproof lock.
■
If a hob is connected, it will not be affected by the
childproof lock on the oven.
■
After a power cut, the childproof lock will no longer
be active.
Activating and deactivating
To activate the childproof lock, the function selector
must be set to the "Off" position.
Press and hold the
'
button for approx. 4 seconds.
The symbol for this function will appear on the display.
The childproof lock is now activated.
Note:
If a timer duration
V
has been set, this will
continue to count down. While the childproof lock is
active, the timer duration cannot be changed.
To deactivate the childproof lock, press and hold the
'
button again for approx. 4 seconds until the symbol
goes out on the display.
