55
Configuring the base station
talk&surf V.6 / englisch / A31008-X100-B100-1-76D1 / Einstellen.fm / 17.09.2003
ì
Click
Apply
.
The new settings will be sent to the base station.
Detailed description
Further information
"Setting up channel bundling" on page 33
Setting dialling parameters
ì
Double-click
Configuration
in
Folder List
.
This displays the dialogues available.
ì
Click
Dial settings
.
The corresponding tabs are then displayed. You will now see the
Dial parameters
tab.
ì
Define the
dialling parameters
you want to use with your base station.
– In the
Int. access code
field, enter
International access code
with up to 4 digits
for making calls abroad. The
international access code 00
is preset.
– In the
Country code
field, enter the
access code
for your country with up to
2 digits. The country code is used for the correct assignment of your calls in inter-
national mobile telephone networks (GSM).
– In the
Nat. access code
field, enter an
access code
with up to 4 digits for making
calls to other national local networks. The
access code 0
is preset.
– In the
Dial parameter
section, activate the option you want to use with your base
station. The default setting is
Standard dial
.
– In the
Access code (SC)
field enter the Access code with up to 4 digits to get an
outside line for all outgoing calls. There is no default access code in the factory
setting.
ì
Click
Apply
.
The new settings will be sent to the base station.
Detailed description
Further information
"Entering emergency numbers" on page 56
"Using the room monitor function" on page 57
"Configuring short message service (SMS)" on page 58
