Siemens GIGASET SX762 WLAN DSL Manual Download Page 87

Page: 87 / 149

Configuring Advanced Settings

Gigaset SX762 WLAN dsl / en / A31008-M707-L101-1-7619 / configure_router.fm / 15.05.2007

hablone 200

5_05_

USB

Using your device's USB port, you and other users in the local network can

share USB mass storage (page 86) or

use a USB printer (page 88).

Go to the

Advanced Settings

–

USB

menu.

Select the

option for

USB

Click

to activate the USB port.

If a USB device is connected, its

Status

is displayed.

Notes:

If you connect a USB hub to the USB port of the Gigaset SX762 WLAN dsl, you can
connect and use a USB memory and a USB printer at the same time.

If connecting a device without its own power supply directly to the USB port,
please note that the power consumption must not exceed 500 mA.

The Gigaset SX762 WLAN dsl supports USB V 2.0. Devices that support USB V 1.1
may also be connected.

Summary of Contents for GIGASET SX762 WLAN DSL






















































































































































Search results

Summary of Contents for GIGASET SX762 WLAN DSL

Reviews:

Related manuals for GIGASET SX762 WLAN DSL

Brands by name

Popular brands

Siemens GIGASET SX762 WLAN DSL, Manual

Search results

Summary of Contents for GIGASET SX762 WLAN DSL

Reviews:

Related manuals for GIGASET SX762 WLAN DSL

Brands by name

Popular brands