manualshive.com logo in svg

Siemens GIGASET SX762 WLAN DSL, Manual, Page: 30 / 149

Share
Download
Siemens GIGASET SX762 WLAN DSL Manual Download Page 30

28

First steps

Gigaset SX762 WLAN dsl / en / A31008-M707-L101-1-7619 / device_762.fm / 15.05.2007

Sc

hablone 200

4_08

_26

When the device is ready for use, the LEDs light up as follows:

u

The 

Power

 LED on the front lights up. 

u

The 

ADSL

 LED flashes to indicate that the DSL connection is being synchronised. 

Once this process is complete, the ADSL LED lights up permanently.

u

The 

WLAN

 LED lights up to indicate that the Gigaset SX762 WLAN dsl is ready to 

establish wireless connections. 
The radio link to a PC that is connected by means of a wireless network adapter is 
opened automatically provided the network adapter has been configured with the 
same SSID as the Gigaset SX762 WLAN dsl. It can take a few seconds for the wireless 
connection to be established. The 

WLAN

 LED flashes when data is sent or received 

via this connection.

u

The 

LAN

 LEDs light up if a device is connected to the corresponding LAN port. 

If this is not the case, refer to the section entitled Troubleshooting on (page 117).

Network configuration of the PCs

In order to communicate via the Gigaset SX762 WLAN dsl, the 

network configuration

 

may have to be set up on the connected PCs. 
With

u

Windows XP

 or

u

Windows 2000

 

operating systems, this usually takes place automatically provided you have not made 
any changes to the standard settings for the network configuration. 
With 

Windows 98/SE

, you have to carry out the network configuration.

The description of the network configuration can be found on the CD-ROM in the docu-
ment entitled "Configuring the local area network".

Making the basic settings

You can now make the basic settings for Internet access using the user interface of the 
Gigaset SX762 WLAN dsl (page 30).
If you want to connect additional PCs to the Gigaset SX762 WLAN dsl, please read the 
next section.

Phone 1/
Phone 2

On

The receiver of the phone connected to the port has been 
lifted. 

Flashing

The phone is ringing and a call is being received or a call is 
being conducted. 

Off

No phone is connected or the connection is idle.

LED

State

Status

Summary of Contents for GIGASET SX762 WLAN DSL






















































































































































Reviews:

No comments