Siemens gigaset SX761 DSL Manual Download

Page: 86 / 118

Administration

Gigaset SX761 dsl / eng / A31008-M707-R111-2x-7619 / admin_router.fm / 06.10.2008

Schabl

one 2

005_0

7_2

Local firmware update

End all network activities in the local network.

Choose

Local

Firmware update source

if you have already loaded the firmware

file you want to install on your PC (see page 84).

The firmware version that is currently installed on the device is displayed in the

Current

firmware version

line.

In the

Local firmware update file

field, enter the file with the new firmware that

you have downloaded from the Internet or click Browse to search for the file in your

PC's file system.

Click

Start firmware update

. The firmware will now be updated.

After a successful update, the device is automatically rebooted. All LEDs go out. The

software version displayed in the overview of the

Status

menu (page 89).

Warning:
Do not

turn off the Gigaset SX761 dsl during the updating procedure and do not inter-

rupt the power supply. Turning off the device can make it unusable. The update can

take several minutes.

Gigaset Communications GmbH accepts no liability for damage that occurs through

improper use.

Summary of Contents for gigaset SX761 DSL























































































































Search results

Summary of Contents for gigaset SX761 DSL

Reviews:

Related manuals for gigaset SX761 DSL

Brands by name

Popular brands

Siemens gigaset SX761 DSL, Manual

Search results

Summary of Contents for gigaset SX761 DSL

Reviews:

Related manuals for gigaset SX761 DSL

Brands by name

Popular brands