Siemens gigaset SX761 DSL Manual Download

Page: 31 / 118

Basic Setup Wizard

Gigaset SX761 dsl / eng / A31008-M707-R111-2x-7619 / configure_router.fm / 06.10.2008

Schabl

one 2

005_0

7_2

PPPoE pass-through

This option is only available if you have chosen another

Protocol

than PPPoE. PPPoE

pass-through allows you to use an additional Internet connection (through another

service provider) on one PC. Further information about this can be found on page 43.

Deactivate

PPPoE pass-through

if you do not wish to use this function.

After entering the data click

Next >

Using UPnP (Universal Plug and Play)

PCs with

UPnP

(Universal Plug & Play) can offer their own network services and automat-

ically use services offered in the network. Further information about this can be found

on page 43.

To go to the next step, click

Next >

Summary of Contents for gigaset SX761 DSL























































































































Search results

Summary of Contents for gigaset SX761 DSL

Reviews:

Related manuals for gigaset SX761 DSL

Brands by name

Popular brands

Siemens gigaset SX761 DSL, Manual

Search results

Summary of Contents for gigaset SX761 DSL

Reviews:

Related manuals for gigaset SX761 DSL

Brands by name

Popular brands