Siemens Gigaset SX303isdn User Manual Download Page 95

Page: 95 / 183

Security settings

SX303/353isdn / englisch / A31008-X353-B100-2-7619 / security.fm / 14.11.2005

Defining authorisation

You can set different authorisations for all registered devices:

◆

Unrestricted

(set as factory default)

All devices can answer incoming calls and make outgoing external/internal calls.

◆

Incoming only

The devices can only answer incoming external calls. External outgoing calls are not

possible. Internal calls (outgoing and incoming) are possible. Emergency numbers

can be dialled.

◆

Internal only

The devices can only be used for internal calls (incoming and outgoing). Emergency

numbers can be dialled.

Emergency numbers

By default, the country-specific emergency numbers are entered. You cannot change or

delete these. You can enter five emergency numbers of your own.

Open the menu.

Set base

Select the menu item and confirm.

Settings

Select the menu item and confirm.

If required, enter the PIN and confirm (page 91).

Security

Confirm.

Authorisation

Select the menu item and confirm.

INT11: Int.11

Select internal number, e.g.

INT11:

Int.11

Press the display key to open the submenu.

Internal only

Select authorisation and confirm (

‰

= set),

e.g.

Internal only

Hold

down (back to idle status).

The emergency number can also be dialled by a handset with restricted

authorisation (e.g.

Internal only

Summary of Contents for Gigaset SX303isdn
























































































































































































Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands

Siemens Gigaset SX303isdn, User Manual

Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands