Siemens Gigaset SX303isdn User Manual Download Page 93

Page: 93 / 183

Date and Time

SX303/353isdn / englisch / A31008-X353-B100-2-7619 / time_calendar.fm / 14.11.2005

Activating/deactivating Saturday/Sunday all day Night service

Sat/Sun all day

is set, then Night service is active between the indicated start and

end times from M-F, and all day on weekends. If

Sat/Sun all day

is deactivated, calls are

also diverted at the weekend between the set start and end times.
By factory default,

Sat/Sun all day

is activated.

Activating/deactivating Night service

You can only activate night service if you have entered a divert destination for the

receive MSN and if no call diversions are currently activated.

If Night service is activated for an MSN,

Night service

is marked with

‰

Open the menu.

Set base

Select the menu item and confirm.

Night service

Select the menu item and confirm.

Select MSN and confirm, e.g.

MSN1: Anna

Sat/Sun all day

Select the menu item and confirm (

‰

= activated).

Hold

down (back to idle status).

Open the menu.

Set base

Select the menu item and confirm.

Night service

Select the menu item and confirm.

MSN1:

Select MSN and confirm, e.g.

MSN1: Anna

either ...

Activating Night service:

Activate?

Select the menu item and confirm.

or ...

Deactivating Night service:

Deactivate?

Select the menu item and confirm.

Hold

down (back to idle status).

Summary of Contents for Gigaset SX303isdn
























































































































































































Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands

Siemens Gigaset SX303isdn, User Manual

Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands