Siemens Gigaset SX303isdn User Manual Download Page 84

Page: 84 / 183

Setting the answering machine (on SX353isdn)

SX303/353isdn / englisch / A31008-X353-B100-2-7619 / answeringm_config.fm / 14.11.2005

Setting time control

You can set the answering machine so that it is activated or deactivated depending on

the time of day, as well as using different announcements depending on the time of

day.
You can define (for the 24-hour day) up to four time sections with different settings for

the answering machine. You must specify a start time for each time section. The start

time of the 2nd time section is the end time of the 1st time section, etc.. The start time

of the 1st time section is the end time of the last defined time section. For each section,

you can set if the answering machine should be activated/deactivated and which

announcement or announcement only should be used.
You specify the time control for work days (Monday to Friday). At the weekend (Saturday

and/or Sunday), either the time control for working days can be used, one of the

announcements is activated for the entire day, or the answering machine is deactivated

for the entire day.

Example:

The answering machine in your office should be deactivated during normal office hours

(8:00 to 5:00 p.m.). The answering machine should only be activated during the lunch

hour (12:00 to 1:00 p.m.) using announcement 1. After office hours (5:00 to 8:00 p.m.)

the answering machine should use announcement only. The following time sections

must be defined:
1. Start time 08:00, AM off
2. Start time 12:00, announcement 1
3. Start time 13:00, AM off
4. Start time 5:00 p.m., announce only

Defining start times and announcements for Monday to Friday

Precondition:

You have selected an answering machine (page 63).

Settings

Select the menu item and confirm.

Time control

Select the menu item and confirm.

Mon - Fri

Select the menu item and confirm.

‰

= at least one

start time is entered.

Select entry for the time section,

e.g.

**:** Announcement 1

, and confirm.

Select ann.

Select the menu item and confirm.

Announcement 1

Announcement 2

Select

Announcem. only

AM off

and confirm.

{

Press the display key.

Summary of Contents for Gigaset SX303isdn
























































































































































































Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands

Siemens Gigaset SX303isdn, User Manual

Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands