Siemens Gigaset SX303isdn User Manual Download Page 74

Page: 74 / 183

Operating the answering machine (on SX353isdn)

SX303/353isdn / englisch / A31008-X353-B100-2-7619 / answeringm_use.fm / 14.11.2005

Deleting all old messages/memos

Precondition:

You have selected an answering machine (page 63).

Marking an old message or memo as "new"

You can mark messages/memos you have already played back as "new". This will display

this message/memo on the handset as a new entry by flashing the message key

by text in the display.
Pressing the messages key

gives you direct access to the message/memo once more.

During playback:

If other recordings are available, playback continues.

Adding a number to the Phonebook

While a message is being played back you can display the caller's phone number and

store it in the Phonebook.

Precondition:

The caller's number has been identified.

During playback:

either ...

Delete all old messages:

Messages

Confirm. Message playback begins.

Press the display key to open the submenu.

Del.old messages

Select the menu item and confirm.

[RRRRRRRRRRRRRRRRRRRRRRRRRR]

YES

Confirm.

or ...

Delete all old memos:

Memos

Select the menu item and confirm.

Play memo

Select the menu item and confirm.

Press the display key to open the submenu.

Delete old memos

Select the menu item and confirm.

[RRRRRRRRRRRRRRRRRRRRRRRRRR]

YES

Confirm.

Press the display key to open the submenu.

Status to 'new'

Select the menu item and confirm. The current

recording is given the status "new".

Press the display key to open the submenu.

Save number

Select the menu item and confirm.

Enter name.

Press the display key to open the submenu.

Store

Confirm.

Summary of Contents for Gigaset SX303isdn
























































































































































































Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands

Siemens Gigaset SX303isdn, User Manual

Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands