Siemens Gigaset SX303isdn User Manual Download Page 54

Page: 54 / 183

SMS (text messages)

SX303/353isdn / englisch / A31008-X353-B100-2-7619 / sms.fm / 14.11.2005

Activating/deactivating SMS send centre

To send an SMS you must activate the phone number for the required SMS centre as the

send centre. By doing this you determine via which SMS centre the text message is to

be sent. Text messages can be received via all SMS centres entered, as long as you have

previously been through the registration procedure (see the next chapter) as an SMS-

capable connection.

Open the menu.

Set base

Select the menu item and confirm.

Settings

Select the menu item and confirm.

Service centres

Select the menu item and confirm. You will now see

the phone number list.

Select the required telephone number.

Open the submenu.

either ...

Activate SMS centre as the send centre:

Serv.centre on?

Select the menu item and confirm. The display

switches to

Serv.centre off?

Quick

press (back to list of send centres).

The SMS centre is activated as the send centre. In the

list the phone number of the SMS centre is marked

with a

‰

. The previous active send service centre is

deactivated automatically.

or ...

Deactivate SMS centre:

Serv.centre off?

Select the menu item and confirm. SMS centre is

deactivated.

Quick

press (back to list of send centres).

◆

When the

Service centres

phone number list is opened, the display

jumps immediately to the send centre.

◆

If you have not activated an SMS send centre you will not be able to

send an SMS, but you will be able to receive text messages from all the

SMS centres you have entered.

Summary of Contents for Gigaset SX303isdn
























































































































































































Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands

Siemens Gigaset SX303isdn, User Manual

Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands