Siemens Gigaset SX303isdn User Manual Download Page 53

Page: 53 / 183

SMS (text messages)

SX303/353isdn / englisch / A31008-X353-B100-2-7619 / sms.fm / 14.11.2005

By default, the "Anny Way" SMS centre has already been entered (number 0190 01504)

and activated as the send centre. This means that, in Germany, you may send text

messages immediately.
You can activate another SMS centre as your send centre. The send centre that was

activated previously is then automatically deactivated.

Receiving an SMS

Text messages can be received via all SMS centres entered, assuming you are registered

with these SMS centres as an SMS recipient (for information about registering, see

page 52).

Entering, editing or deleting phone numbers for SMS centres

You can enter up to ten SMS centres.
Before entering or editing the number, please obtain information about special features

and what the SMS service provider offers.

Open the menu.

Set base

Select the menu item and confirm.

Settings

Select the menu item and confirm.

Service centres

Select the menu item and confirm. The phone

number list appears.

Select entry, e.g.

<empty>

Open the submenu.

either ...

Changing an entry:

Edit entry

Confirm.

Enter the phone number of the SMS centre.

Press the display key to open the submenu.

Save entry

Confirm.

or ...

Delete an entry:

Delete entry

Select the menu item and confirm.

Hold

down (back to idle status).

◆

If you delete the phone number of a send centre, then you must

activate another SMS centre to be the send centre in order to be able

to continue sending text messages.

◆

If your telephone is connected to a PABX, you may have to prefix the

phone number with an access code (number with which you obtain

an exchange line, usually "0") (this depends on your PABX), see

page 61.

Summary of Contents for Gigaset SX303isdn
























































































































































































Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands

Siemens Gigaset SX303isdn, User Manual

Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands