Siemens Gigaset SX303isdn User Manual Download Page 51

Page: 51 / 183

Making cost-effective calls

SX303/353isdn / englisch / A31008-X353-B100-2-7619 / charges.fm / 14.11.2005

Displaying and deleting the cost overview

Depending on the setting, call or charge units for each internal user, for each set-up

MSN, and for the entire system are displayed.

Activating/deactivating the charges of the last call

You can display the total charges and the charges of the last call for this terminal on the

terminal.

Precondition:

MSN next call

not

activated.

By factory default,

Last charge

is deactivated.

Once the function has been activated, the call charges are displayed on the terminal

when you lift the receiver. If the connection was not successful, the charges are

displayed after ending the call.

Open the menu.

Costs

Select the menu item and confirm.

Cost overview

Confirm. The total amount (for all internal users) is

displayed.

Scroll to the accounts for the individual internal

users or MSNs set up.

If necessary, delete the amount from the cost

overview:

Press the display key to open the submenu.

Delete amount

Select the menu item and confirm.

Total and individual charges must be deleted separately, i .e. if

for example you delete the amount for an MSN, the individual charges for

the terminals are retained, and must be deleted separately.

Open the menu.

Costs

Select the menu item and confirm.

Last charge

Select the menu item and confirm (

‰

= activated).

Hold

down (back to idle status).

Summary of Contents for Gigaset SX303isdn
























































































































































































Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands

Siemens Gigaset SX303isdn, User Manual

Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands