Siemens Gigaset SX303isdn User Manual Download Page 44

Page: 44 / 183

Using the Phonebook and other lists

SX303/353isdn / englisch / A31008-X353-B100-2-7619 / directories.fm / 14.11.2005

Automatic redial

With this function, the phone number of a party you did not reach is redialled

automatically every 20 seconds. The handsfree key flashes and "Open listening" is

activated. If the party answers, press the talk key

. "Open listening" remains activated.

If the party does not answer, the call is terminated after approx. 30 seconds. The

function switches itself off after twelve unsuccessful dialling attempts.
To be able to use automatic redial from the last number redial list,

MSN next call

must

be deactivated for the handset (page 97).

To cancel automatic redial, press the display key

CANCEL

or any key.

Deleting a single phone number

Opening lists with the message key

Providing a new entry is present in the relevant list, you can open the following lists

using the message key

1. Incoming SMS message list

Textmessage(SMS)

(page 57)

2. List of missed calls

Missed calls

(page 42)

3. Answering machine lists

AM1

AM2

AM3

(on base station SX353isdn, page 67)

These lists display the calls, messages and text messages belonging to the receive MSN's

assigned to the base station.
As soon as a

new entry

(calls, messages on an integrated answering machine and/or

SMS) were received in one or more lists, the key

flashes

and an advisory tone is

heard.

If the flashing key

is pressed, the following is displayed:

◆

If only one list has new entries, you will see the first new entry in that list.
Open entry:

(Select entry)

◆

If several lists have new entries, those lists are offered for your selection.

Open entry:

(select list)

(select entry)

If the key

is pressed, and it is not blinking, the following is displayed:

The message

No new messages

is displayed. Then the list of missed calls are opened.

Press end call key.

Open the last number redial list.
The party who could not be reached is selected.

Open the menu.

Automatic Redial

Confirm.

A call in the meantime deactivates the automatic redial. You must

activate it again afterwards.

Open the last number redial list.

Select an entry and open the menu.

Delete entry

Select the menu item and confirm.

Hold

down (back to idle status).

Summary of Contents for Gigaset SX303isdn
























































































































































































Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands

Siemens Gigaset SX303isdn, User Manual

Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands