Siemens Gigaset SX303isdn User Manual Download Page 12

Page: 12 / 183

Preparing the base station for use

SX303/353isdn / englisch / A31008-X353-B100-2-7619 / starting.fm / 14.11.2005

Connecting additional devices

You can connect an analogue device to the Gigaset SX303isdn/SX353isdn (page 129).

You can also use the USB connection on the base station to operate a PC (page 136).

Keep the power supply unit

plugged in at all times

to ensure your phone

is ready for use whenever you need it.
Neither the base station nor the registered handsets will operate in the

event of a power failure. However, all the settings and stored information

(messages, Phonebook entries etc.) are retained indefinitely.

◆

Insert the small jack on the power cord into the socket on the base station

◆

Position cable in the cable recess

◆

Ensure that the receiver is positioned correctly on the base station!

Plug the power supply unit into your power outlet.

Outlet

Power supply unit

with power cord

Cable recess

Underside of

base station

(enlarged view)

Connection for

wire-based terminal

with internal number 21

USB port

Summary of Contents for Gigaset SX303isdn
























































































































































































Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands

Siemens Gigaset SX303isdn, User Manual

Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands