30
SMS (text messages)
Gigaset SL550 / IM MEA Englisch / A31008-M1710-A601-1-7619 / sms_BRD_neutral.fm / 10.11.05
SMS to a PABX
u
You can only receive an SMS when the
Calling Line Identification
is
for-
warded to the extension of the PABX
(CLIP)
. The CLIP of the phone number
for the SMS centre is evaluated in your
Gigaset
.
u
If required, you must prefix the number
for the SMS centre with the access code
(depending on your PABX).
If in doubt, test your PABX e.g. by send-
ing a text message to your own
number: once with and once without
the access code.
u
When you send SMS messages, your
sender number may be sent without
your extension number. In this case the
recipient cannot reply to you directly.
Sending and receiving SMS
on ISDN
PABXs
is only possible via the MSN
number assigned to your base station.
Activating/deactivating the
SMS function
When you switch off you cannot send or
receive any SMS with your phone.
The settings which you have made for
sending and receiving SMS (e.g. the call
numbers of the SMS centres) and the
entries in the incoming and draft message
lists are saved when you switch off your
phone.
w
Open
menu.
N 5 O 2 L
Enter the digits.
Q
§OK§
Deactivate the SMS function.
Or:
1
§OK§
Activate SMS function (default
settings).
SMS troubleshooting
Errors when sending
Self-help with errors
The following table lists error situations
and possible causes and provides notes on
troubleshooting.
E0 Calling Line Identification permanently
withheld (CLIR) or Calling Line
Identification not activated.
FE Error occurred during SMS transfer.
FD Connection to SMS centre failed, see self-
help.
You cannot send messages.
1. You have not requested the CLIP service
(Calling Line Identification Presentation).
¥
Ask your service provider to enable this
service.
2. Text message transmission has been inter-
rupted (e.g. by a call).
¥
Re-send the text message.
3. Feature is not supported by network pro-
vider. .
4. No number or an invalid number is entered
for the SMS centre activated as the send
centre.
¥
Enter the number (page 29).
You receive a message whose text is incom-
plete.
1. Your phone memory is full.
¥
Delete old messages (page 27).
2. The provider has not yet sent the rest of the
message.
You have stopped receiving messages.
1. You have changed the ID of your mailbox.
¥
Tell your SMS contacts your new ID or
undo the change (page 29).
2. You have not activated your mailbox.
¥
Activate your mailbox (page 29).
3. Call diversion is activated with
When: All Calls
or the call diversion
All Calls
is activated for
the network mailbox.
¥
Change your call diversion.
