28
First steps
Gigaset SL37H / IM5 RU English / A31008-M1952-S301-2-9U19 / main.fm / 4.11.08
Ve
rs
ion 4,
16
.09.
2005
Setting your own area code
In order to transfer phone numbers
between Bluetooth connections and
phone, it is essential that your area code
(international and local area code) is
stored on the phone.
Some of these numbers are already pre-
set.
w
¢
Ð
¢
Handset
¢
Area Codes
Check that the (pre)set area code is cor-
rect.
¤
Change multiple line input:
q
Select/change input field.
r
Navigate in the input field.
X
If necessary, delete number:
press the display key.
~
Enter number.
§Save§
Press the display key.
Example
:
Restoring the handset to the
factory settings
You can reset any individual settings and
changes that you have made. Entries in
the directory, the call-by-call list, the call
history, the SMS lists (depending on the
base station) and the handset's registra-
tion to the base station as well as the con-
tent of My stuff are retained.
w
¢
Ð
¢
Handset
¢
Reset Handset
Yes
Press the display key.
a
Press
and
hold
(idle status).
Appendix
Care
Wipe the base station, charging cradle and
handset with a
damp
cloth (do not use
solvent) or an antistatic cloth.
Never
use a dry cloth. This can cause
static.
Contact with liquid
If the handset has come into contact with
liquid:
1.
Switch off the handset and remove
the battery pack immediately
.
2. Allow the liquid to drain from the hand-
set.
3. Pat all parts dry, then place the handset
with the battery compartment open
and the keypad facing down in a dry,
warm place
for at least 72 hours
(
not
in a microwave, oven etc.).
4. Do not switch on the handset again
until it is completely dry.
When it has fully dried out, you will nor-
mally be able to use it again.
Questions and answers
If you have any questions about using
your handset, visit us at any time at
www.gigaset.com/customercare. The
table below contains a list of common
problems and possible solutions.
Area Codes
International code:
00
- 7
Local area code:
0 - [ 495 ]
X
Save
Registration or connection problems with a
Bluetooth headset.
¥
Reset the Bluetooth headset (see the user
guide for your headset).
¥
Delete registration data from the handset
when de-registering the device
¥
Repeat the registration process
!
