Siemens Gigaset SL 740 Operating Manual Download

Page: 54 / 76

Base station settings

SL 740 / Singapore / A31008-L740-S102-1-7619 / settings_bs_hs.fm / 13.07.2004

Changing the name of the base
station

The names "Base station 1" to "Base

station 4" are assigned automatically. The

name of the base is handset-dependent,

i.e. the base station receives the name

which was assigned by the handset. The

same base station can have different

name on different handsets. You can

change the name of your base station.

Handset

Select Base

Select base station and press

Edit

Enter a new name with up to

16 -characters (p. 60).

Save

Now press the display key to

save the setting.

Repeater support

With a repeater you can increase the range

and reception strength of your base

station; the repeater must be registered.

To use the repeater you must first activate

the repeater mode. This will cancel any

calls that are in progress.

Base

Add. Features

Repeater Mode

Select and press

Yes

Press the display key.

Restoring the base station to
factory settings

When the settings are restored the hand-

sets are still registered. The following set-

tings are not reset:

System PIN

"First ringer tone suppressed" setting

SMS information services

Base

Base Reset

Enter system PIN and press

Yes

Press the display key.

For factory setting see page 58.

Summary of Contents for Gigaset SL 740













































































Search results

Summary of Contents for Gigaset SL 740

Reviews:

Related manuals for Gigaset SL 740

Brands by name

Popular brands

Siemens Gigaset SL 740, Operating Manual

Search results

Summary of Contents for Gigaset SL 740

Reviews:

Related manuals for Gigaset SL 740

Brands by name

Popular brands