Siemens Gigaset SL 740 Operating Manual Download

Page: 52 / 76

Base station settings

SL 740 / Singapore / A31008-L740-S102-1-7619 / settings_bs_hs.fm / 13.07.2004

Using other menu functions:

Open

menu.

You can now select the following

functions with

and confirm your

choice with

Edit Entry

Change selected appointment.

Delete Entry

Delete selected appointment.

Delete List

Delete

all

appointments.

Switching off or answering an

appointment alarm

Press the display key

Silence

to deactivate

the appointment call or select

MMS

respond with an MMS.

Displaying missed
appointments,
and anniversaries

Missed appointments/anniversaries

(page 5 0/page 14) are stored in the

Missed

Dates

list in the following cases.

You do not keep an appointment/

anniversary.

The handset is switched off at the time

of the appointment/anniversary.

The newest entry is at the beginning of

the list.

Missed Dates

Select appointment/

anniversary.

This will display information

about the appointment/

anniversary. A missed

appointment is marked

with

, a missed anniversary

with

‚

Delete

Press the display key to delete

the appointment/anniversary

MMS

Press the display key to write

an MMS.

Long

press (idle status).

If there is a new appointment/anniversary

in the list, the display shows

Appoint

Pressing the display key also opens the

Missed Dates

list.

If the list contains 30 entries, the oldest

entry is deleted when the next

appointment call rings.

Restoring the handset to
factory settings

You can reset individual settings and

changes you have made. This will not

affect entries in the directory, the calls list,

the email directory or the speed dial list,

the handset's registration to the base

station and the contents of the File

Manager. The appendix provides an

overview of the default settings, page 58.
Press

to cancel the reset.

Handset

Reset Handset

Yes

Press the display key.

Long

press (idle status).

Base station settings

All the settings for the base station are

made with a registered Gigaset SL74

handset.

Protection against unauthorised
access

Protect the base station system settings

with a system PIN that only you know. The

system PIN must now be entered for

handset registration/de-registration,

restoring factory settings, internal

activation or barring numbers, for

example.

Summary of Contents for Gigaset SL 740













































































Search results

Summary of Contents for Gigaset SL 740

Reviews:

Related manuals for Gigaset SL 740

Brands by name

Popular brands

Siemens Gigaset SL 740, Operating Manual

Search results

Summary of Contents for Gigaset SL 740

Reviews:

Related manuals for Gigaset SL 740

Brands by name

Popular brands