72
Handset settings
Gigaset S810-S810A / Grossbritannien / A31008-M2306-L101-1-7619 / registr_sett.fm / 18.03.2011
V
e
rsion 4.1, 21
.11.2007
Changing the speaker/
earpiece volume
You can set the loudspeaker volume for
handsfree mode and the earpiece volume to
five different levels.
During a conversation via the earpiece or in
handsfree mode:
ø
/
÷
Press the side key to call up the
Handset Volume
menu.
Change the volume by pressing
ø
(louder) or
÷
(quieter).
or
t
Press the control key to call up
the
Handset Volume
menu. Set
the earpiece or speaker volume
by pressing
r
.
The setting will automatically be saved after
approximately 3 seconds, if not then press
the display key
§Save§
.
If
t
is assigned to another function, e.g., call
swap (
§Options§
Open menu.
Volume
Select and press
§OK§
.
Configure setting (see above).
Setting a handsfree profile
You can set different handsfree profiles to
optimally adapt your phone to your environ-
ment.
Profile 1
The optimum setting for most connec-
tions and set as default.
Profile 2
Optimum volume in handsfree mode.
However, this means that the participants
cannot speak at the same time as the per-
son speaking is given preferential trans-
mission (making two-way conversations
difficult).
Profile 3
Optimises two-way conversations, both
callers can hear each other, even if they
talk at the same time.
Profile 4
Optimised for special connections. If the
default setting (profile 1) does not pro-
vide optimum sound, please give this a
try.
In idle status:
v
¢
Ï
¢
Audio Settings
¢
Handsfree Profiles
q
Select handsfree profile (1 to 4).
§Select§
Press the display key to save the
setting.
During a conversation:
§Options§
Open menu.
Handsfree Profiles
Select and press
§OK§
.
q
Select handsfree profile (1 to 4).
§Select§
Press the display key to save the
setting.
Please note
u
The settings for the earpiece also
apply to a connected headset.
u
You can also set the call volume using
the menu (
