65
Using multiple handsets
Gigaset S810-S810A / Grossbritannien / A31008-M2306-L101-1-7619 / registr_sett.fm / 18.03.2011
V
e
rsion 4.1, 21
.11.2007
Listening in to an external call
Prerequisite:
The
Listening In
function must
be activated.
You are conducting an external call. An inter-
nal participant can listen in on this call and
take part in the conversation. All the partici-
pants are made aware of additional listeners
by a signal tone.
Activating/deactivating
listening in
v
¢
Ï
¢
Telephony
¢
Listening In
Press
§Change§
to activate/deactivate the func-
tion (
³
= on).
Internal listening in
The line is engaged with an external call.
Your screen will display information to that
effect. To listen in to the external call.
c
Press
and
hold
the talk key.
You can listen in to the call. All participants
hear a signal tone. During this time, this
handset displays the
Conference
message
and it is not possible to dial another number
from this handset.
Ending listening in
a
Press the end call key.
All participants hear a signal tone.
If the
first
internal participant presses the
end call key
a
, the handset that has "lis-
tened in" remains connected to the external
participant.
Changing the name of a
handset
The names "INT 1", "INT 2" etc. are assigned
automatically on registration. You can
change these names. The name must be no
more than 10 characters. The changed name
is displayed in every handset's list.
u
Open the list of handsets. Your
own handset is indicated by
f
.
s
Select handset.
§Options§
Open menu.
Rename
~
Enter name.
§Save§
Press the display key.
Changing a handset's
internal number
A handset is
automatically
assigned the
lowest free number when it is registered. If
all slots are occupied, number 6 is overwrit-
ten if this handset is in idle status. You can
change the internal number of all registered
handsets (1–6).
u
Open the list of handsets. Your
own handset is indicated by
f
.
§Options§
Open menu.
Assign Handset No.
Select and press
§OK§
.
r
Select number. Only numbers
that have not been assigned are
displayed.
§Save§
Press the display key to save the
input.
•
