82
Gigaset S810-S810A / Grossbritannien / A31008-M2306-L101-1-7619 / appendix.fm / 18.03.2011
V
e
rsion 4.1, 21
.11.2007
Gigaset S810A only:
Authorisation
This device is intended for analogue phone
lines in the UK.
Country-specific requirements have been
taken into consideration.
We, Gigaset Communications GmbH,
declare that this device meets the essential
requirements and other relevant regulations
laid down in Directive 1999/5/EC.
A copy of the 1999/5/EC Declaration of
Conformity is available at this Internet
address:
www.gigaset.com/docs
Guarantee Certificate
United Kingdom
Without prejudice to any claim the user (cus-
tomer) may have in relation to the dealer or
retailer, the customer shall be granted a
manufacturer's Guarantee under the condi-
tions set out below:
u
In the case of new devices and their com-
ponents exhibiting defects resulting from
manufacturing and/or material faults
within 24 months of purchase, Gigaset
Communications shall, at its own option
and free of charge, either replace the
device with another device reflecting the
current state of the art, or repair the said
device. In respect of parts subject to wear
and tear (including but not limited to,
batteries, keypads, casing), this warranty
shall be valid for six months from the date
of purchase.
u
This Guarantee shall be invalid if the
device defect is attributable to improper
treatment and/or failure to comply with
information contained in the user guides.
u
This Guarantee shall not apply to or
extend to services performed by the
authorised dealer or the customer them-
selves (e. g. installation, configuration,
software downloads). User guides and
any software supplied on a separate data
medium shall be excluded from the Guar-
antee.
u
The purchase receipt, together with the
date of purchase, shall be required as evi-
dence for invoking the Guarantee. Claims
under the Guarantee must be submitted
within two months of the Guarantee
default becoming evident.
u
Ownership of devices or components
replaced by and returned to Gigaset
Communications shall vest in Gigaset
Communications.
No time is specified for a message in the call list.
Date and time have not been set.
¥
Set the date and time (
The answering machine announces "PIN is
incorrect" during remote operation.
1. You have entered the wrong system PIN.
¥
Enter the system PIN again.
2. The system PIN is still set to 0000.
¥
Set the system PIN to something other
than 0000 (
The answering machine is not recording any
messages/has switched over to answer only.
Its memory is full.
¥
Delete old messages.
¥
Play back new messages and delete.
Exclusion of liability
Some displays may contain pixels (pic-
ture elements), which remain activated
or deactivated. As a pixel is made up of
three sub-pixels (red, green, blue), it is
possible that pixel colours may vary.
This is completely normal and does not
indicate an error.
