65
Handset settings
Gigaset S790-S795 / en Großbritannien / A31008-M2102-L101-2-7619 / registr_sett.fm / 29.03.2010
V
e
rsion 4.1, 21
.11.2007
Changing the speaker/
earpiece volume
You can set the loudspeaker volume for
speaker mode and the earpiece volume to
five different levels.
During a conversation via the earpiece or in
speaker mode:
ø
/
÷
Press the side key to call up the
Handset Volume
menu.
Change the volume by pressing
ø
(louder) or
÷
(quieter).
or
t
Press the control key to call up
the
Handset Volume
menu. Set
the earpiece or speaker volume
by pressing
r
.
The setting will automatically be saved after
approximately 3 seconds, if not then press
the display key
§Save§
.
If
t
is assigned to another function, e.g., call
swap (
§Options§
Open menu.
Volume
Select and press
§OK§
.
Configure setting (see above).
Setting a handsfree profile
In idle state, you can set various handsfree
profiles to optimally adapt your phone to
your environment.
Profile 1
The optimum setting for most connec-
tions and set as default.
Profile 2
Optimum volume in handsfree mode.
However, this means that the participants
cannot speak at the same time as the per-
son speaking is given preferential trans-
mission (making two-way conversations
difficult).
Profile 3
Optimises two-way conversations, both
callers can hear each other, even if they
talk at the same time.
Profile 4
Optimised for special connections. If the
default setting (profile 1) does not pro-
vide optimum sound, please give this a
try.
v
¢
Ï
¢
Audio Settings
¢
Handsfree Profiles
Select handsfree profile (1 to 4) and press
§Select§
.
Changing ringtones
u
Volume:
You can choose between five volumes (1–
5; e.g., volume 3 =
Š
) and the "cre-
scendo" ringtone (6; volume increases
with each ring =
‡
).
u
Ringtones:
You can select a ringtone from a list of
pre-loaded melodies.
You can select various ringtones, melo-
dies or any sound from the Resource
Directory (
You can set different ringtones for the fol-
lowing functions:
u
Int. Calls
u
Extern. Calls
Please note
u
The settings for the earpiece also
apply to a connected headset.
u
You can also set the call volume using
the menu (
