Siemens Gigaset S685 IP Manual Download Page 77

Page: 77 / 278

Using directories and the call-by-call list

Gigaset S675/S685 IP / GBR / A31008-xxxx-xxxx-x-xxxx / directories_charges.fm / 5/18/09

ion 8,

.09

.200

You can transfer several individual entries one after the other by responding

§Yes§

to the

Copy next entry?

prompt.

Please note:

Entries with identical numbers are not overwritten in the receiver handset.

The transfer is cancelled if the phone rings or if the memory of the receiving

handset is full.

Gigaset S68H: Transferring directory entries as a vCard via

Bluetooth

In Bluetooth mode (

Page 140

), you can transfer directory entries in vCard

format, e.g. to exchange entries with your mobile.
Preconditions:

Your own area code is stored in the phone (

Page 154

Bluetooth is activated (

Page 140

The device that you want to send the entries to (e.g. mobile), is registered

with the handset as a Bluetooth device (

Page 140

(Select entry)

§Options§

Copy Entry / Copy List

vCard via Bluetooth

Select and press

§OK§

The

Known Devices

(

Page 142

) list is displayed.

Select device and press

§OK§

Receiving a vCard with Bluetooth

If a device from the

Known Devices

(

Page 142

) list sends a vCard to your

handset, this occurs automatically and you are informed about it via the dis-

play.
If the sending device does not appear in the list, you will be asked on the dis-

play to enter the device PIN for the sending device:

If necessary, enter the PIN for the

sending

Bluetooth device and

press

§OK§

The transferred vCard is available as a directory entry.

Please note

You can also send the complete

directory

via data transfer, without opening

the directory:

Data Transfer

Directory.

Summary of Contents for Gigaset S685 IP























































































































































































































































































Search results

Summary of Contents for Gigaset S685 IP

Reviews:

Related manuals for Gigaset S685 IP

Brands by name

Popular brands

Siemens Gigaset S685 IP, Manual

Search results

Summary of Contents for Gigaset S685 IP

Reviews:

Related manuals for Gigaset S685 IP

Brands by name

Popular brands