Siemens Gigaset S685 IP Manual Download Page 63

Page: 63 / 278

Making calls via network services

Gigaset S675/S685 IP / GBR / A31008-xxxx-xxxx-x-xxxx / netservices_SAG.fm / 5/18/09

ion 8,

.09

.200

Activating/deactivating call waiting

If call waiting is activated, a caller on the fixed line network will hear the ringing

tone if you are already conducting a phone conversation using your fixed line

connection. This call is announced acoustically and visually on your handset

screen.
Calls on the VoIP connection are not shown as call waiting. They are signalled

on other registered handsets. If no other handset is available, the caller will

hear the busy tone.
Accepting/rejecting a waiting call,

Page 62

Telephony

Sel. Services

Fixed Line

Call Waiting

Status

Activate/deactivate.

Press the display key

§Send§

Press the end call key

after the announcement from the telephone net-

work.

Functions during a call

Initiating ringback

You hear the busy tone.

§Options§

Ringback

Press the end call key.

Consultation call

During a call:

§Options§

External Call

Enter a number or copy it from the directory and press

§OK§

The number will be dialled via the fixed line connection.

You have the following options:

Call swapping:

Use

to swap between the participants.

End call with active participant:

§Options§

End Active Call

Conference call:

End call with both participants: press the end call key

Please note

The setting does not affect the procedure for call waiting on the VoIP connec-

tion. For information on how to activate/deactivate call waiting for the VoIP

connection,

Page 63

Please note

After a few seconds, the number selected for a consultation call is saved in the

redial list.

Summary of Contents for Gigaset S685 IP























































































































































































































































































Search results

Summary of Contents for Gigaset S685 IP

Reviews:

Related manuals for Gigaset S685 IP

Brands by name

Popular brands

Siemens Gigaset S685 IP, Manual

Search results

Summary of Contents for Gigaset S685 IP

Reviews:

Related manuals for Gigaset S685 IP

Brands by name

Popular brands