Siemens Gigaset S685 IP Manual Download Page 217

Page: 217 / 278

215

Web configurator – setting the phone using a PC

Gigaset S675/S685 IP / GBR / A31008-xxxx-xxxx-x-xxxx / web_server.fm / 5/18/09

ion 8,

.09

.200

If you register a new handset on your base station it will assume the time and

date of the base station without any additional synchronisation with the time

server.

Date and time settings are transferred to every handset after synchronisation.

Querying the phone status

General information about your phone is displayed.

In the menu list, select the

Status

tab.

The following information is displayed:

Area:

IP Configuration

IP address

The phone's current IP address within the local network. For details on assign-

ing the IP address,

Page 174

MAC address

The phone's device address.

Area:

Software

Firmware version

Version of the firmware currently downloaded. You can download updates of

the firmware to your phone (

Page 158

). Firmware updates are available on

the Internet.

EEPROM version

Version of your phone's EEPROM storage chip (

Page 252

Please note

The default time server "europe.pool.ntp.org" will remain stored in the base

station even if you overwrite it. If you delete your time server from the

Time

Server

field and synchronisation is still activated, the base station will con-

tinue to synchronise with the default time server. However, it will no longer

appear in the

Time Server

field.

If you have entered your own time server in the

Time Server

field and the

base station is unable to synchronise for ten consecutive attempts, the base

station will synchronise with the default time server.

If you have deactivated synchronisation with a time server, and if the date

and time are not set on any handset, then the base station will attempt to

reference date and time settings from the CLIP information of an incoming

call.

Summary of Contents for Gigaset S685 IP























































































































































































































































































Search results

Summary of Contents for Gigaset S685 IP

Reviews:

Related manuals for Gigaset S685 IP

Brands by name

Popular brands

Siemens Gigaset S685 IP, Manual

Search results

Summary of Contents for Gigaset S685 IP

Reviews:

Related manuals for Gigaset S685 IP

Brands by name

Popular brands