Siemens Gigaset S685 IP Manual Download Page 138

Page: 138 / 278

136

Using several handsets

Gigaset S675/S685 IP / GBR / A31008-xxxx-xxxx-x-xxxx / T-NetBox_SAG-registration.fm / 5/18/09

ion 8,

.09

.200

Transferring a call to another handset

You can forward (connect) an external call, made via the fixed line network or

VoIP, to another handset.

Open the list of handsets.

The external participant hears hold music if activated

(

Page 157

Select handset or

Call All

and press

§OK§

When the internal participant answers:

If necessary announce the external call.

Press the end call key.

The external call is transferred to the other handset.
If the internal participant does

not

answer or the line is busy, press the display

key

§End§

to return to the external call.

When transferring a call you can also press the end call key

before the

internal participant answers.
Then, if the internal participant does not answer or the line is busy, the call will

automatically return to you (the display will show

Recall

Initiating internal consultation call, conference call

You are talking to an

external

participant (via fixed line network or VoIP) and

can call an

internal

participant at the same time to hold a consultation call.

Open the list of handsets.

The external participant hears hold music if activated

(

Page 157

Select handset and press

§OK§

When an internal participant answers you can speak to them.
You have the following options:

Ending the consultation call

§End§

Press the display key.

You are reconnected with the external subscriber.

Initiating a conference call

§Conf.§

Press the display key.

You are in a three-way conference call with the external participant and the

internal participant.
If the internal participant who has been called ends the call (press end call key

), you will be connected with the external participant. If you press end call

key

the external call will be transferred to the internal subscriber.

Summary of Contents for Gigaset S685 IP























































































































































































































































































Search results

Summary of Contents for Gigaset S685 IP

Reviews:

Related manuals for Gigaset S685 IP

Brands by name

Popular brands

Siemens Gigaset S685 IP, Manual

Search results

Summary of Contents for Gigaset S685 IP

Reviews:

Related manuals for Gigaset S685 IP

Brands by name

Popular brands