Siemens Gigaset S685 IP Manual Download Page 131

Page: 131 / 278

129

Setting an appointment (calendar)

Gigaset S675/S685 IP / GBR / A31008-xxxx-xxxx-x-xxxx / T-NetBox_SAG-registration.fm / 5/18/09

ion 8,

.09

.200

Managing appointments

Select the day in the graphical calendar and press

§OK§

. Days

on which appointments have already been saved are highlighted in

black in the calendar.

Select appointment for the day.

§Options§

Open menu.

Back with

”

You have the following options:

View Entry

View selected appointment.

§Options§

Open the menu for editing, deleting and activating/deactivating.

Edit Entry

Edit selected appointment.

Delete Entry

Delete selected appointment.

Activate / Deactivate

Activate/deactivate the selected appointment.

Delete List

Delete

all

appointments.

Deactivating or accepting an appointment reminder

An appointment reminder is signalled with the selected ringer (

Page 150

The appointment reminder sounds for 60 seconds. The entered text, date and

time are displayed.
During a call, the appointment reminder is signalled by a short tone.

Precondition

: An appointment reminder is sounding.

Press the display key

§OFF§

to switch off the appointment reminder.

Or:

Press the display key

§SMS§

to write an SMS.

Summary of Contents for Gigaset S685 IP























































































































































































































































































Search results

Summary of Contents for Gigaset S685 IP

Reviews:

Brands by name

Popular brands

Siemens Gigaset S685 IP, Manual

Search results

Summary of Contents for Gigaset S685 IP

Reviews:

Brands by name

Popular brands