Siemens Gigaset S685 IP Manual Download Page 105

Page: 105 / 278

103

Messenger

Gigaset S675/S685 IP / GBR / A31008-xxxx-xxxx-x-xxxx / messenger.fm / 5/18/09

ion 8,

.09

.200

Receiving messages

Precondition:

You are online.

Newly arrived buddy or info messages (

Page 104

) are indicated by a flash-

ing message key

and a beep, even if you are in a messenger menu or text

editor.
The messages are stored in the

Messenger:

list.

Opening the message list using the

key

The message key flashes.

Press the message key

Select

Messenger: (2)

list if required and press

§OK§

. The number in brackets

indicates the number of new messages.

To open the message list from the

menu:

When the handset is in idle status:

Messenger

Messages

Select and press

§OK§

Message list

The messages on the list are sorted chronologically, with the oldest message at

the head of the list.
Example of a list display:

1 Sender's Web name/user ID

Bold:

new/unread message

2 Date and time of message

3 Message from the messenger server (

Page 104

)

If the memory is full and new messages arrive, the oldest message(s) will be

overwritten. If there are no old (read) messages, the oldest new (unread) mes-

sages will be overwritten.

Please note

The

Messenger

list is only displayed if you are online.

Please note

If you are in the messenger menu or one of its submenus/text editors and you

press the flashing message key

, this will open the

Messenger

list directly.

Messenger

Julian

15.01.09

15:25

INFO message

15.01.09

15:30

Delete

Read

Summary of Contents for Gigaset S685 IP























































































































































































































































































Search results

Summary of Contents for Gigaset S685 IP

Reviews:

Related manuals for Gigaset S685 IP

Brands by name

Popular brands

Siemens Gigaset S685 IP, Manual

Search results

Summary of Contents for Gigaset S685 IP

Reviews:

Related manuals for Gigaset S685 IP

Brands by name

Popular brands