Siemens Gigaset S685 IP Manual Download Page 104

Page: 104 / 278

102

Messenger

Gigaset S675/S685 IP / GBR / A31008-xxxx-xxxx-x-xxxx / messenger.fm / 5/18/09

ion 8,

.09

.200

Changes in the status of buddies

You have opened the buddy list and one of the buddies changes their status.

The following distinctions are made:

A buddy changes to status

Online

Ready for chat

You are informed via a message on the display. The buddy list is updated.

In the event of another status change, the buddy list is updated. No message

is displayed.

Requesting information about buddies

You have opened the buddy list (

Page 101

Select

buddy.

§Info§

Press the display key.

The display depends on the provider.
Example:

1 Web name (nickname, abbreviated if necessary)

2 Status

3 User ID (format: userid@provider-domain; abbreviated if necessary). (Resource

names are not displayed)

Press to return to your buddy list. Press

§Chat§

if you want to "chat" with the

buddy.

Chatting to buddies

You want to "chat" to a buddy, i.e. send a message.

Precondition:

You have opened the buddy list (

Page 101

) and selected a

buddy with

Press the display key

§Chat§

. The text editor is opened.

Write and send your message (

Page 105

The buddy list is shown again.

Please note

If the buddy changes to

Offline

status, your messages are no longer sent to

them. Whether the messenger server stores the messages until the buddy is

Online

again or deletes them depends on the provider.

Info

Julian

Online

Julian

jabber.com

Chat

Summary of Contents for Gigaset S685 IP























































































































































































































































































Search results

Summary of Contents for Gigaset S685 IP

Reviews:

Related manuals for Gigaset S685 IP

Brands by name

Popular brands

Siemens Gigaset S685 IP, Manual

Search results

Summary of Contents for Gigaset S685 IP

Reviews:

Related manuals for Gigaset S685 IP

Brands by name

Popular brands